Add to Enquiry

B2 Water Bottom sensor.
B2
B2 Water Bottom sensor.
Set to float on water but sink in oils and fuels.
Detects from 10 to 15 mm of water in the tanks
Specification
The B2 Water bottom sensor is designed to float on water.
These probes come with 6 meters of cable, and a 1" Tank fitting "NJ"
Application
As Standard, when positioned at the bottom of a fuel tank, the float will be close to the bottom and provide a closed circuit. When water level gets to 10 / 15 mm the float lifts, opening the circuit.
Optionally, the end support disc can be removed, the float rotated and the circuit now works in the oposite way. Open circuit when there is no water, and closed circuit when there is.
The unit is suitable for full installation in the products available in the filters above.
Document Download